Schneider Resi9 RCD 2P 40A 30mA A típus R9R22240

Fault currents can cause serious damage to electrical installations and pose a risk of electric shock. The Schneider Resi9 RCD (Residual Current Device) type A, 2-pole, 40 A, 30 mA, provides essential protection by detecting residual currents and disconnecting the circuit quickly. This device is ideal for residential and commercial applications where protection against alternating and pulsating direct residual currents is required.

Who is it for

This RCD is designed for electricians, panel builders, and homeowners who need reliable protection for circuits with single-phase loads. It is suitable for use in distribution boards and consumer units, protecting against earth leakage currents that could cause electric shock or fire.

Main features

• Type A residual current protection: detects alternating and pulsating direct residual currents.
• 2-pole (2P) design for single-phase 230 V AC circuits.
• Rated current 40 A, suitable for a wide range of applications.
• Sensitivity 30 mA, providing personal protection against electric shock.
• Breaking capacity 6 kA, ensuring safe interruption under fault conditions.
• Compact 2-module width for easy installation on DIN rail.
• Complies with EN/IEC 61008-1 standard.

Specifications

• Series: Resi9
• Number of poles: 2P
• Rated current (In): 40 A
• Residual current sensitivity (IΔn): 30 mA
• Residual current type: Type A
• Rated voltage (Ue): 230 V AC
• Frequency: 50/60 Hz
• Rated breaking capacity (Icn): 6 kA
• Rated impulse withstand voltage (Uimp): 4 kV
• Mounting type: DIN rail
• Connection type: Tunnel terminals
• Terminal capacity (rigid cable): 1 to 25 mm²
• Terminal capacity (flexible cable): 1 to 16 mm²
• Degree of protection: IP20 (front face), IP40 (in enclosure)
• Operating temperature: -25 to 60 °C
• Standards: EN/IEC 61008-1
• Electrical durability: 10000 cycles
• Number of modules: 2

Tips

For optimal protection, install this RCD upstream of circuits supplying socket outlets, bathrooms, or outdoor equipment. Test the device regularly using the test button to ensure proper operation. Always disconnect power before installation or maintenance.