BlueOptics 100-02150-BO 10000 Mbit/s SFP+ transceiver modul

The BlueOptics 100-02150-BO SFP+ transceiver module is a compact 10 Gigabit Ethernet optical interface designed for high-speed fiber networks. Supporting a maximum data transfer rate of 10000 Mbit/s and a maximum reach of 40,000 meters over single-mode fiber with an LC (UPC) connector, this silver-coloured module is intended for integration into compatible switches, routers and media converters. With a lightweight metal housing of approximately 20 g and a mean time between failures (MTBF) rated at 1,000,000 hours, the module offers a balance of durability and compactness for rack-mounted and distributed network installations.

Advantages

The module provides 10 Gigabit Ethernet performance in a small SFP+ form factor, enabling dense port configurations and flexible deployment. The LC (UPC) fiber connector ensures reliable optical coupling and compatibility with standard single-mode cabling. Its low weight and silver metal housing simplify handling and insertion into SFP+ cages, while the high MTBF indicates long-term operational reliability in continuous network environments.

Suitable for

• High-speed uplinks between switches and core devices
• 10 Gigabit Ethernet server connections and storage networks
• Long-distance single-mode fiber links up to 40 km
• Media converters and network equipment requiring SFP+ optical modules

Key specifications

• Data transfer rate: 10000 Mbit/s (10 Gb/s)
• Maximum transfer distance: 40000 m (40 km) over single-mode fiber
• Interface type: 10 Gigabit Ethernet (SFP+ form factor)
• Fiber connector: LC (UPC)
• Product colour: Silver
• Weight: 0.02 kg
• Reliability: MTBF 1,000,000 hours

How to use

Before installation, verify compatibility with the host device's SFP+ cage and firmware requirements. Handle the transceiver by its housing, avoiding contact with the optical connector. Remove protective caps from both the module and fiber connector, then insert the module into the SFP+ slot until it latches. Connect the LC patch cable to the module's connector, ensuring correct polarity and secure mating. After installation, check link status LEDs on the host device and confirm the expected link speed and optical diagnostics where available.

Recommendations

Store and operate the module within the equipment manufacturer's recommended temperature and humidity ranges. Use clean LC connectors and perform connector inspection or cleaning if required. For long links, verify fiber type and loss budget; for best results, use single-mode fiber certified for 40 km links. Replace protective caps when the module is not in use to prevent contamination.