Fiók Kapcsolat
Kosár
DPD & FedEx – a várható kiszállítás dátuma a termékoldalon.
Segítségre van szüksége? Kérdezze AI-asszisztensünket!

Bosch S 1222 VF fűrészlap

Bosch S 1222 VF fűrészlap
Bosch S 1222 VF fűrészlap
13 750 Ft
PDF
PDF

Szállítás és visszaküldés

Várható kiszállítás december 8., kedd
Részletes csomagkövető rendszerünk segítségével folyamatosan tájékoztatjuk
Fizetési lehetőségek
BankkártyaVisaMastercardPayPalApple PayGoogle PayBanki átutalás

Tegyen fel egy kérdést – az AI-asszisztens azonnal válaszol.

Leírás

The Bosch S 1222 VF saw blade is designed for cutting glass fibre reinforced plastic, metal, sheet metal, aluminium profiles and wood containing nails. With a total length of 300 mm and a tooth configuration milled and side-set in bimetal (BIM), the blade is suitable for flush and flexible cutting tasks where a mix of materials is present.

Advantages

The bimetal (BIM) construction and milled, side-set tooth design provide a balance of durability and cutting performance across different materials. A tooth spacing range of 1.8–2.6 mm (10–14 TPI) gives controlled chip removal and smoother cuts in thin metals and composite materials. The 300 mm total length and 0.9 mm thickness allow access in compact applications while maintaining blade stability.

Suitable for

Key specifications

How to use

Fit the S 1222 VF blade to a compatible reciprocating saw according to the tool manufacturer's instructions. Select appropriate speed and feed rate for the material being cut: lower speed and steady feed for metal and composites, moderate speed for wood with nails. Use firm, consistent pressure and allow the blade to cut without forcing to avoid premature wear. Ensure the workpiece is secured and support cut sections to prevent binding.

Recommendations

For prolonged blade life, avoid overheating by making intermittent cuts in metal and composite materials, and replace the blade if teeth show significant wear or damage from cutting nails. Always wear appropriate eye, hand and respiratory protection when cutting mixed materials.
Főbb jellemzők
  • Wood containing nails or small metal inclusions (cut depth
  • Sheet metals and aluminium profiles (thickness 3–10 mm)
  • Glass fibre reinforced plastic/epoxy panels (cut depth
  • Flexible flush cutting where mixed materials occur
  • Type: S 1222 VF
  • Material: Bimetal (BIM)
  • Total length: 300 mm
  • Thickness: 0.9 mm
  • Tooth spacing: 1.8–2.6 mm (10–14 TPI)

Műszaki adatok

Műszaki adatok
Anyagokhoz alkalmas
Glass fibre reinforced plastic, Metal, Sheet metal, Wood with nails
Pengefog-távolság (min.)
1.8 mm
Pengék közötti távolság (max.)
2.6 mm
Tömeg
0.2 kg
Változó fogköz-távolságok
Igen
Az elmúlt 6 hónap ártörténete
Bosch S 1222 VF fűrészlap
Jelenlegi
13 750 Ft
Legalacsonyabb 7 nap
13 360 Ft
Legmagasabb 7 nap
13 750 Ft
24 órás változás
0 Ft   0%
7 napos változás
+356 Ft   +3%
30 napos változás
+105 Ft   +1%

Értékelés írása

Értékelés *
Megjegyzés: A HTML-formázás nem jelenik meg!

További BOSCH termékek ebben a kategóriában

12

Népszerű termékek ebben a kategóriában

1
Eladó: UAB KUR LT · Gariūnų g. 57-17, LT-02300 Vilnius, Litvánia · Cégjegyzékszám 303192950 · Közösségi adószám LT100008198612 · Szállítás az EU-ból (Litvánia)
WhatsApp
Messenger
Üdvözlöm, a DistriNode AI-asszisztense vagyok. Szívesen segítek termékek keresésében, a lehetőségek összehasonlításában, PDF-árajánlatok készítésében vagy ügyfélszolgálati bejelentések indításában.
Összes kategória