Fiók Kapcsolat
Kosár
DPD & FedEx – a várható kiszállítás dátuma a termékoldalon.
Segítségre van szüksége? Kérdezze AI-asszisztensünket!

Flashforge 40001899001 ventilátor hosszabbító kábel 3D nyomtató hűtőventilátorhoz

Flashforge 40001899001 ventilátor hosszabbító kábel 3D nyomtató hűtőventilátorhoz
Flashforge 40001899001 ventilátor hosszabbító kábel 3D nyomtató hűtőventilátorhoz
1 626 Ft
PDF
PDF

Szállítás és visszaküldés

Várható kiszállítás december 7., hétfő
Részletes csomagkövető rendszerünk segítségével folyamatosan tájékoztatjuk
Fizetési lehetőségek
BankkártyaVisaMastercardPayPalApple PayGoogle PayBanki átutalás

Leírás

Flashforge 40001899001 fan extension cable is a purpose-built accessory that extends the electrical connection for a 3D printer cooling fan. Designed for use with Flashforge printers and compatible fans that share the same connector type and wiring order, this extension provides extra reach to reposition cooling fans, simplify cable routes, or replace a damaged lead without altering original components.

Advantages

The extension cable preserves the original fan connector and wiring integrity while increasing usable cable length. It enables easier fan placement in tight or modified enclosures and reduces strain on existing wiring and connectors. Because the cable follows the standard pin layout used in Flashforge-compatible fans, installation is straightforward and maintains proper power and signal connections for reliable cooling performance.

Suitable for

  • Relocating a 3D printer cooling fan to improve airflow or fit modifications
  • Replacing a short or damaged fan lead without changing the fan assembly
  • Cable routing in custom enclosures, upgrades, or filament printers with limited fan reach

Key specifications

  • Purpose: extension lead for 3D printer cooling fan
  • Compatibility: Flashforge printers and accessories using matching connector and wiring
  • Connector type: matching two- or three-pin fan connector (compatible with standard printer fan wiring)
  • Cable function: power and signal conduction for brushless DC cooling fans
  • Cable construction: insulated wires with connector housings for plug-and-play connection

How to use

Power off the printer and disconnect it from mains before connecting the extension cable. Match the connector orientation and pin order on the fan and control board, then plug the extension between the fan lead and the board or fan header. Ensure connectors are fully seated and that wires are not pinched or strained when routing the cable. After connection, restore power and verify fan operation at low and normal speeds to confirm correct wiring and stable cooling performance.

Recommendations

Use the extension only with compatible Flashforge-style fan connectors and within the electrical specifications of the fan and printer. Avoid excessive cable tension, sharp bends, or exposure to high temperatures near heated elements. If the fan fails to operate or runs irregularly after installation, power down the printer and recheck connector seating and pin alignment.

Főbb jellemzők
  • Relocating a 3D printer cooling fan to improve airflow or fit modifications
  • Replacing a short or damaged fan lead without changing the fan assembly
  • Cable routing in custom enclosures, upgrades, or filament printers with limited fan reach
  • Purpose: extension lead for 3D printer cooling fan
  • Compatibility: Flashforge printers and accessories using matching connector and wiring
  • Connector type: matching two- or three-pin fan connector (compatible with standard printer fan wiring)
  • Cable function: power and signal conduction for brushless DC cooling fans
  • Cable construction: insulated wires with connector housings for plug-and-play connection
Az elmúlt 6 hónap ártörténete
Flashforge 40001899001 ventilátor hosszabbító kábel 3D nyomtató hűtőventilátorhoz
Jelenlegi
1 626 Ft
Legalacsonyabb 7 nap
1 626 Ft
Legmagasabb 7 nap
6 917 Ft
24 órás változás
-5 291 Ft   -76%
7 napos változás
-5 156 Ft   -76%
30 napos változás
-5 267 Ft   -76%

Értékelés írása

Értékelés *
Megjegyzés: A HTML-formázás nem jelenik meg!

További FLASHFORGE termékek ebben a kategóriában

12

Népszerű termékek ebben a kategóriában

8
Eladó: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litvánia · Cégjegyzékszám 303192950 · Közösségi adószám LT100008198612 · Szállítás az EU-ból (Litvánia)
WhatsApp
Messenger
Üdvözlöm, a DistriNode AI-asszisztense vagyok. Szívesen segítek termékek keresésében, a lehetőségek összehasonlításában, PDF-árajánlatok készítésében vagy ügyfélszolgálati bejelentések indításában.
Összes kategória