HDMI-kábel ROLINE 14.01.3451 10 m

The ROLINE 14.01.3451 HDMI cable 10 m is a high-speed HDMI Type A to Type A lead designed to carry uncompressed digital video and audio signals for long-distance connections. Supporting HDMI 2.0, the cable is specified to transmit resolutions up to 3840 x 2160 pixels and is suitable for linking displays, projectors, AV receivers and media players where a reliable 10 metre connection is required. The black jacket provides a neutral appearance that blends into typical home and office AV installations.

Advantages

This 10 m HDMI cable provides stable transmission of high-definition video and multi-channel audio over a single lead, reducing cable clutter compared with separate video and audio wiring. Conformance with HDMI 2.0 capabilities enables 4K@60Hz signals and broad device compatibility with HDMI Type A ports. The standardized connectors on both ends simplify installation and replacement in existing setups.

Suitable for

• Connecting a 4K TV or monitor to a set-top box, media player or computer
• Linking a projector to a laptop or AV receiver in conference rooms or classrooms
• Integrating a Blu-ray player, game console or streaming device into a home theatre
• Temporary or permanent AV runs in offices, digital signage or control rooms

Key specifications

• Cable length: 10 m
• Connector type: HDMI Type A to HDMI Type A (both ends)
• Supported HDMI version: HDMI 2.0
• Maximum supported resolution: 3840 x 2160 pixels
• Colour: Black

How to use

Connect one HDMI Type A plug to the source device (for example a laptop, media player or set-top box) and the other HDMI Type A plug to the display device (such as a monitor, TV or projector). Ensure both devices are powered off when inserting the connectors, then power on the devices and select the appropriate HDMI input on the display. Adjust the output resolution and refresh rate in the source device settings to match the display’s supported parameters for optimal image quality.

Recommendations

For best results, route the cable away from large electrical equipment and power cables to reduce potential interference. Avoid sharp bends and kinks; use gentle curves and secure the cable with appropriate clips or ties. If 4K@60Hz performance is required, verify that connected devices and settings support HDMI 2.0 features and that cable connections are fully seated.