Fiók Kapcsolat
Kosár
DPD & FedEx – a várható kiszállítás dátuma a termékoldalon.
Segítségre van szüksége? Kérdezze AI-asszisztensünket!

InLine 95611 középfeszültségű kábel középfeszültségű kábel

InLine 95611 középfeszültségű kábel középfeszültségű kábel
InLine 95611 középfeszültségű kábel középfeszültségű kábel
8 826 Ft
PDF
PDF

Szállítás és visszaküldés

Várható kiszállítás november 27., péntek
Részletes csomagkövető rendszerünk segítségével folyamatosan tájékoztatjuk
Fizetési lehetőségek
BankkártyaVisaMastercardPayPalApple PayGoogle PayBanki átutalás

Tegyen fel egy kérdést – az AI-asszisztens azonnal válaszol.

Leírás

The InLine 95611 medium-voltage solar cable H1Z2Z2-K, 6 mm², length 1.5 m, with one black and one red solar plug, is intended for the DC cabling of photovoltaic systems. It is constructed for long-term outdoor use with UV-, ozone- and weather-resistant materials, halogen-free low-smoke insulation and tested voltage ratings up to 1.5 kV DC according to EN 50618. The cable supports reliable power transmission between modules and inverters while meeting the safety and fire behaviour requirements of modern PV installations.

Advantages

The cable combines a fine-wired tinned copper conductor with cross-linked polyolefin (XLPO) insulation and a durable outer jacket to provide low DC resistance, mechanical robustness and resistance to UV, ozone and weather. It is LSOH (low smoke, zero halogen) and flame-resistant according to EN 60332-1-2, and has been voltage-tested for AC and DC to ensure operational reliability in solar applications. The 6 mm² conductor size and 6.3 mm outer diameter make the cable suitable for common PV string connections while the pre-assembled solar plugs (black and red) simplify installation.

Suitable for

  • DC cabling between solar panels and inverters in photovoltaic systems
  • Short to medium-length connections where a 1.5 m cable is sufficient
  • Outdoor installations requiring UV-, ozone- and weather-resistant wiring

Key specifications

  • Product name: InLine 95611 / H1Z2Z2-K solar cable
  • Conductor cross-section: 6 mm², fine-wired, tinned copper
  • Length: 1.5 m
  • Outer diameter: approx. 6.3 mm
  • Insulation wall thickness: 0.7 mm (nominal)
  • Jacket thickness: 0.8 mm (nominal)
  • Rated voltage: 1.0/1.0 kV AC
  • Maximum working voltage: 1.5 kV DC (EN 50618)
  • DC line resistance: 3.3 Ω/km
  • Voltage test: AC 6.5 kV, DC 15 kV
  • Temperature range: -40 °C to +90 °C
  • Minimum bending radius: 26 mm
  • Standards: EN 50618, EN 60811, EN 60332-1-2
  • Fire and smoke properties: LSOH (halogen-free, low smoke)

How to use

Install the cable for DC connections in photovoltaic systems following local electrical codes and the inverter/manufacturer instructions. Connect the red and black solar plugs to the corresponding positive and negative terminals; ensure polarity and secure, clean contacts. Route the cable to avoid sharp edges and excessive mechanical stress, maintain the minimum bending radius of 26 mm, and secure it with appropriate clips or ties. Verify the required conductor cross-section for the expected current and installation distance — consult a qualified solar technician if necessary.

Recommendations

For safe and compliant operation, use the cable only for PV DC wiring up to the specified 1.5 kV DC rating, avoid prolonged mechanical strain or repeated flexing, and perform regular visual inspections for jacket damage. If cable length or current requirements differ from planned values, select a suitable cross-section and consult a solar installer to confirm cable selection and circuit protection.
Főbb jellemzők
  • DC cabling between solar panels and inverters in photovoltaic systems
  • Short to medium-length connections where a 1.5 m cable is sufficient
  • Outdoor installations requiring UV-, ozone- and weather-resistant wiring
  • Product name: InLine 95611 / H1Z2Z2-K solar cable
  • Conductor cross-section: 6 mm², fine-wired, tinned copper
  • Length: 1.5 m
  • Outer diameter: approx. 6.3 mm
  • Insulation wall thickness: 0.7 mm (nominal)
  • Jacket thickness: 0.8 mm (nominal)
  • Rated voltage: 1.0/1.0 kV AC
  • Maximum working voltage: 1.5 kV DC (EN 50618)
  • DC line resistance: 3.3 Ω/km
  • Voltage test: AC 6.5 kV, DC 15 kV
  • Temperature range: -40 °C to +90 °C
  • Minimum bending radius: 26 mm
  • Standards: EN 50618, EN 60811, EN 60332-1-2
  • Fire and smoke properties: LSOH (halogen-free, low smoke)

Műszaki adatok

Műszaki adatok
Átmérő
6.3 mm
Csomag magassága
25 mm
Csomag szélessége
250 mm
Csomag térfogata
1600 cm³
Csomag tömege
308 g
Csomagolás mélysége
320 mm
Hossz
1.5 m
Megfelelőségi tanúsítványok
RoHS, TÜV jelölés
Nem tartalmaz
Halogén
Származási ország
Tajvan
Szigetelés vastagsága
0.7 mm
Termék színe
Fekete, piros
Terméktípus
Középfeszültségű kábel
Tömeg
287 g
Tűzálló
Igen
Üzemi feszültség (max.)
1500 V
Vezető anyaga
Ónozott réz
Vezetők keresztmetszete
6 mm²
Az elmúlt 6 hónap ártörténete
InLine 95611 középfeszültségű kábel középfeszültségű kábel
Jelenlegi
8 826 Ft
Legalacsonyabb 7 nap
8 685 Ft
Legmagasabb 7 nap
11 273 Ft
24 órás változás
-2 447 Ft   -22%
7 napos változás
+119 Ft   +1%
30 napos változás
0 Ft   0%

Értékelés írása

Értékelés *
Megjegyzés: A HTML-formázás nem jelenik meg!

További INLINE termékek ebben a kategóriában

12
Eladó: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litvánia · Cégjegyzékszám 303192950 · Közösségi adószám LT100008198612 · Szállítás az EU-ból (Litvánia)
WhatsApp
Messenger
Üdvözlöm, a DistriNode AI-asszisztense vagyok. Szívesen segítek termékek keresésében, a lehetőségek összehasonlításában, PDF-árajánlatok készítésében vagy ügyfélszolgálati bejelentések indításában.
Összes kategória