Lanview RWP16U56WH fali rack 16U IP20 fehér

Lanview RWP16U56WH is a 16U wall-mounted network rack with dimensions 600 x 560 x 823 mm and an IP20 rating for indoor use. The cabinet features a white finish, a tempered 4 mm antistatic glass door with extruded aluminum frame and colored side strips for a decorative appearance. The rack is delivered with one set and two device installation rails that allow depth adjustment of installed equipment, and it supports cable entry from the top, bottom and rear through 145 x 70 mm openings. Side panels are detachable to provide access from front and sides in wall-mounted installations and from all sides in freestanding configurations.

Advantages

The unit combines tempered, smoothed antistatic glass with an extruded aluminum door frame for high fracture resistance and a neat look. Detachable side panels and adjustable device rails simplify installation and equipment access. Multiple cable entry points and a rubber-edged cable entry module with sliding compression (movable 0–50 mm) provide secure cable routing and reduce dust ingress. Optional fan module (up to two fans) can be attached to the upper ventilation opening for active ventilation; otherwise the ventilation openings enable passive airflow.

Suitable for

• Wall-mounted network and server equipment installations in offices and communication rooms
• Organizing switches, patch panels and small UPS units in indoor environments
• Environments requiring controlled cable entry from top, bottom and rear

Key specifications

• Model: Lanview RWP16U56WH
• Mounting: Wall-mounted (also usable freestanding with optional feet or caster group)
• Rack units: 16U
• Dimensions (W x D x H): 600 x 560 x 823 mm
• Door: 4 mm tempered antistatic glass with extruded aluminum frame
• IP rating: IP20 (indoor use)
• Weight: 30.5 kg
• Cable entries: 145 x 70 mm openings at top, bottom and rear; rubber-edged movable cable entry 0–50 mm with sliding compression
• Ventilation: Passive via chassis openings; optional active ventilation with up to 2 fans (fan module sold separately)
• Accessories included: 1 set and 2 device installation rails

How to use

Mount the cabinet on a suitable load-bearing wall using appropriate hardware and ensure clearance for ventilation and cable routing. Install device rails at the required depth, mount network equipment and route cables through the 145 x 70 mm openings at the top, bottom or rear. If needed, fit the rubber-edged cable entry module and compress incoming cables using the sliding compression system to secure and seal the entry. For active cooling, attach the optional fan module with up to two fans to the upper ventilation hole.

Recommendations

Use suitable wall anchors for the cabinet weight and the load of installed equipment; maintain clearance around ventilation openings and consider adding the optional fan module when installed equipment generates significant heat. Keep the rubber cable entry seals properly positioned to minimize dust ingress.