Fiók Kapcsolat
Kosár
DPD & FedEx – a várható kiszállítás dátuma a termékoldalon.
Segítségre van szüksége? Kérdezze AI-asszisztensünket!

Lian Li UF-SLIN140-1B

Lian Li UF-SLIN140-1B
Lian Li UF-SLIN140-1B
Lian Li UF-SLIN140-1B
Lian Li UF-SLIN140-1B
Lian Li UF-SLIN140-1B
Lian Li UF-SLIN140-1B
Lian Li UF-SLIN140-1B
Lian Li UF-SLIN140-1B
Lian Li UF-SLIN140-1B
Lian Li UF-SLIN140-1B
14 368 Ft
PDF
PDF
Készlet 50 Termékkód 306869 Modell G99.14SLIN1B.00 Garancia 2 év

Szállítás és visszaküldés

Várható kiszállítás december 2., szerda
Részletes csomagkövető rendszerünk segítségével folyamatosan tájékoztatjuk
Fizetési lehetőségek
BankkártyaVisaMastercardPayPalApple PayGoogle PayBanki átutalás

Tegyen fel egy kérdést – az AI-asszisztens azonnal válaszol.

Leírás

The Lian Li UF-SLIN140-1B is a 140 mm Infinity Mirror ARGB case fan combining the modular UNI FAN SL design with a multi-layered centered infinity mirror and side-frame ARGB strips. It features aluminum trims around the mirror, an ARGB rim behind the rear logo, and improved modularity for daisy-chaining up to four fans per cluster. The reversible central cable module and removable interlocking key simplify installation and compatibility with radiator fittings. Performance is tuned for balanced airflow and static pressure while keeping noise low, and lighting and fan behaviour are controllable via L-Connect 3.

Advantages

The UF-SLIN140-1B offers a layered infinity-mirror lighting center and dual side LED strips for distinct multi-angle illumination. Its 2nd-generation interlocking system supports tool-free connection of multiple fans and a pin-to-pad daisy-chain for signal and power sharing, reducing cable clutter. The central reversible cable module and removable key improve clearance with radiators. Performance improvements deliver higher airflow and static pressure at a wider RPM range with lower noise. Full ARGB control and synchronization are available through L-Connect 3, including intelligent start/stop and motherboard sync options.

Suitable for

  • PC builds requiring a 140 mm ARGB fan with decorative infinity-mirror lighting
  • Systems with radiators where cable clearance and modular connections matter
  • Users who want software control over lighting and fan curves (L-Connect 3)
  • Multi-fan setups that benefit from daisy-chaining and controller support

Key specifications

  • Fan diameter: 140 mm
  • Speed range: 0.2 – 1600 RPM (specified for UF-SLIN140-1B)
  • Maximum static pressure: 2.88 mmH2O (manufacturer spec)
  • Colour: Black
  • Connector: 7-pin cable module to controller (combined power + lighting)
  • Compatibility: Daisy-chain up to 4 fans per group; controller supports up to 16 fans (with included controller in triple pack)

How to use

Install the UF-SLIN140-1B in a standard 140 mm mounting position inside the case using the provided screws. If using multiple UNI FAN SL-Infinity fans, align and interlock the fans to form a cluster, remove the interlocking key when required for radiator clearance, and connect the daisy-chain pads to pass signal and power through the cluster. Attach the 7-pin cable module to the included controller and connect the controller to your system according to the manual. Configure fan speeds and lighting effects with L-Connect 3 or sync to motherboard software if preferred.

Recommendations

For optimal cooling and noise balance, use L-Connect 3 to set temperature-based fan curves and enable the Start/Stop feature to stop fans at low CPU/GPU temperatures. When mounting near radiators, orient the reversible cable module to reduce inlet/outlet interference and remove the keylock if necessary to improve fitment. When using a triple pack, the included Y-type 7-pin splitter enables adding a fifth group to the same controller if additional fans are required.
Főbb jellemzők
  • PC builds requiring a 140 mm ARGB fan with decorative infinity-mirror lighting
  • Systems with radiators where cable clearance and modular connections matter
  • Users who want software control over lighting and fan curves (L-Connect 3)
  • Multi-fan setups that benefit from daisy-chaining and controller support
  • Fan diameter: 140 mm
  • Speed range: 0.2 – 1600 RPM (specified for UF-SLIN140-1B)
  • Maximum static pressure: 2.88 mmH2O (manufacturer spec)
  • Colour: Black
  • Connector: 7-pin cable module to controller (combined power + lighting)
  • Compatibility: Daisy-chain up to 4 fans per group; controller supports up to 16 fans (with included controller in triple pack)

Műszaki adatok

Műszaki adatok
Alkalmas helyszín
Számítógépház
Anyag
Műanyag
Fordulatszám (max.)
1600 ford./perc
Fordulatszám (min.)
0,2 ford./perc
LED csatlakozó típusa
3-pin
LED-ek száma
40
Maximális légáramlás
72,7 cfm
Maximális légnyomás
2,88 mmH2O
Mennyiség csomagonként
1 pc(s)
RGB-vezérlő mellékelve
Nem
Telepítési útmutató
Igen
Termék színe
Fekete
Típus
Ventilátor
Ventilátor méretei (Sz x Mé x Ma)
140 x 142 x 25
Ventilátor teljesítményfelvétele
4.56 W
Ventilátor vastagsága
25 mm
Ventilátorátmérő
140 mm
Ventilátorcsatlakozó
4-pin
Világítás színe
Multi
Világító LED
Igen
Zajszint (nagy fordulatszám)
28 dB
Az elmúlt 6 hónap ártörténete
Lian Li UF-SLIN140-1B
Jelenlegi
14 368 Ft
Legalacsonyabb 7 nap
14 034 Ft
Legmagasabb 7 nap
14 418 Ft
24 órás változás
-49 Ft   0%
7 napos változás
+334 Ft   +2%
30 napos változás
+823 Ft   +6%

Értékelés írása

Értékelés *
Megjegyzés: A HTML-formázás nem jelenik meg!

Azonos sorozat és alternatívák

3

Népszerű termékek ebben a kategóriában

8
Eladó: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litvánia · Cégjegyzékszám 303192950 · Közösségi adószám LT100008198612 · Szállítás az EU-ból (Litvánia)
WhatsApp
Messenger
Üdvözlöm, a DistriNode AI-asszisztense vagyok. Szívesen segítek termékek keresésében, a lehetőségek összehasonlításában, PDF-árajánlatok készítésében vagy ügyfélszolgálati bejelentések indításában.
Összes kategória