SFP+ transceiver modul BlueOptics 55113507-BO 10000 Mbit/s

The BlueOptics 55113507-BO SFP+ transceiver module is designed for high-speed fiber optic links with a maximum data transfer rate of 10000 Mbit/s. This compact SFP+ form factor module uses an LC fiber connector and is intended for 10 Gigabit Ethernet connections. The module's silver housing and lightweight construction (approximately 20 g) make it suitable for dense, space-constrained networking equipment. Built to comply with CE, FCC and RoHS standards and specified with a high MTBF of 1,000,000 hours, it supports long-distance optical links up to 40,000 m when used with appropriate single-mode fiber and compatible hardware.

Advantages

The module provides 10 Gigabit Ethernet performance in a standardized SFP+ package, enabling easy hot-plug installation and compatibility with many switches and routers that accept SFP+ pluggable optics. Its LC connector and optical design support long-range links, while the high MTBF reflects a design intended for continuous operation. Compliance with CE, FCC and RoHS ensures regulatory and environmental conformity.

Suitable for

• 10 Gigabit Ethernet uplinks between switches or routers
• Long-distance single-mode fiber connections up to 40 km
• Data center aggregation and interconnects
• High-performance campus and enterprise backbones

Key specifications

• Maximum data transfer rate: 10000 Mbit/s
• Maximum transfer distance: 40000 m (40 km) over suitable fiber
• Ethernet interface type: 10 Gigabit Ethernet
• Fiber optic connector: LC
• Form factor: SFP+
• Product colour: Silver
• Weight: approximately 0.02 kg
• High mean time between failures (MTBF): 1,000,000 hours

How to use

Install the BlueOptics 55113507-BO into an open SFP+ slot on a compatible switch, router or media converter while the host device is powered according to the vendor's guidance for hot-plugging transceivers. Connect an LC-terminated single-mode fiber patch cable to the module's LC interface, taking care to observe proper optical polarity. After insertion and connection, verify link status through the host device's management interface and confirm negotiated speed and duplex. Follow any vendor-specific configuration steps if the equipment requires explicit port activation or transceiver validation.

Recommendations

Use this transceiver with single-mode fiber and quality LC patch cords for long-distance links, and ensure port firmware and device compatibility before deployment. Avoid touching the optical interfaces; keep dust caps on until ready to connect and clean connectors with appropriate fiber-optic cleaning tools. Store spare modules in anti-static packaging in a dry environment.