Thermaltake ASTRIA 400 ARGB processzorhűtő

The Thermaltake ASTRIA 400 ARGB is a white single-tower air cooler with integrated addressable RGB lighting and a 120 mm high-airflow fan. Designed for mainstream and high-performance builds, it combines six Ø6 mm U-shaped copper heat pipes with a redesigned fin stack to deliver up to 230 W TDP cooling in a compact 160 mm tall form factor. The cooler supports a wide range of Intel and AMD sockets and synchronizes lighting with common motherboard RGB software via a 5V ARGB header.

Advantages

The ASTRIA 400 ARGB offers a meteor-shower inspired top-cap lighting design with 18 LEDs plus 9 LEDs in the fan (27 LEDs total) for vivid addressable RGB effects controllable from motherboard software. Its 120 mm fan provides up to 65 CFM airflow and 2.56 mm-H2O static pressure while keeping noise around 26.8 dBA. Six direct-contact Ø6 mm copper heat pipes and an optimized fin stack improve heat transfer and increase dissipation within a single-tower layout. The white finish and RAM-friendly layout enable flexible component pairing.

Suitable for

• Cooling mainstream and high-performance desktop CPUs with up to 230 W TDP
• PC builds requiring compact single-tower coolers (160 mm height)
• Systems where motherboard-controlled ARGB lighting synchronization is desired
• Setups needing broad compatibility with Intel and AMD sockets including LGA1851, LGA1700, AM5 and AM4

Key specifications

• Type: Air cooler
• Fan diameter: 120 mm
• Fan speed range: 500–1800 RPM
• Airflow: 65 CFM
• Static pressure: 2.56 mm-H2O
• Noise level: 26.8 dBA
• Heat pipes: 6 × Ø6 mm, U-shaped, direct contact
• Cooling capacity (TDP): 230 W
• Dimensions (W×D×H): 94 × 124 × 160 mm
• Colour: White
• Supported sockets: Intel LGA 2066/2011/1851/1700/1200/1156/1155/1151/1150; AMD AM5/AM4
• RGB: 27 LEDs total; 5V addressable RGB (ARGB) header compatible with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light, ASRock Polychrome

How to use

Mount the universal brackets supplied with the cooler to match your CPU socket following the included installation manual. Position the ASTRIA 400 ARGB so the fan intake direction aligns with your case airflow, attach the 120 mm fan to the fin stack, and secure the cooler onto the CPU ensuring firm but even pressure on the mounting screws. Connect the fan power cable to the motherboard fan header and the 5V ARGB cable to a compatible addressable RGB header to enable lighting control from motherboard software.

Recommendations

For optimal cooling performance, ensure adequate case airflow (intake and exhaust) and use a high-quality thermal paste between the CPU and cooler base. Verify motherboard ARGB compatibility (5V header) before connecting lighting cables and consult your motherboard manual to enable synchronization in the vendor RGB software.