Fiók Kapcsolat
Kosár
DPD & FedEx – a várható kiszállítás dátuma a termékoldalon.
Segítségre van szüksége? Kérdezze AI-asszisztensünket!

VICTRON ENERGY Smart BatteryProtect 48V-100A akkumulátorvédő (BPR110048000)

VICTRON ENERGY Smart BatteryProtect 48V-100A akkumulátorvédő (BPR110048000)
VICTRON ENERGY Smart BatteryProtect 48V-100A akkumulátorvédő (BPR110048000)
51 287 Ft
PDF
PDF

Szállítás és visszaküldés

Várható kiszállítás november 26., csütörtök
Részletes csomagkövető rendszerünk segítségével folyamatosan tájékoztatjuk
Fizetési lehetőségek
BankkártyaVisaMastercardPayPalApple PayGoogle PayBanki átutalás

Tegyen fel egy kérdést – az AI-asszisztens azonnal válaszol.

Leírás

The Smart BatteryProtect SBP 48/100 from Victron Energy (MPN: BPR110048000) with integrated Bluetooth and numerous additional functions offers comprehensive battery protection for all battery types.

  • Input voltage range 24 – 70 V

Freely programmable switch-on and switch-off thresholds via VictronConnect app

  • Possibility to connect an external relay

The Smart BatteryProtect 48/100 from Victron Energy (MPN BPR110048000) offers solid battery protection for 48 V batteries of various types. Compared to the previous series, the Smart version has an integrated Bluetooth module that connects the Smart BatteryProtect (SBP 48/100) to a smartphone or tablet. This allows you to program all required switch-on/switch-off thresholds or select the appropriate value from 9 predefined threshold values.

The BatteryProtect 48/100 can also be used as a charge interrupter between a battery charger and a lithium battery. A wide operating voltage range of 24 - 70 V makes the device universally applicable. The possibility to connect an external switch or alarm to the BatteryProtect makes the SBP 48/100 Smart the perfect battery monitor.

  • Features of the Smart BatteryProtect 48/100
  • 100 A maximum switching capacity

For 48 V batteries with automatic detection of the battery bank voltage range

Explosion protection through integrated MOSFET switches that replace relays and thus reduce the risk of sparking to zero

  • Integrated Bluetooth module, optionally switchable

Alternative programming and status display of settings via seven-segment display possible

  • Integrated alarm output, 9 predefined threshold values selectable
  • An external alarm, LED or relay can be connected to the alarm output

Via relay, the load shedding of the BP can be controlled by external events that cannot be programmed

  • Output for delayed alarm

The alarm output is activated when the battery voltage falls below the preset switch-off value for more than 12 seconds. Starting the engine therefore does not activate the alarm. The alarm output is a short-circuit protected open collector output connected to the negative (minus) rail. Max. current 50 mA. The alarm output is normally used to activate an acoustic signal, an LED or a relay.

  • Solid battery protection for every battery type

Due to its versatile configuration options, the Smart SBP 48/100 is the perfect protection device for your battery and ensures maximum lifetime, because most voltage converters or charge controllers have an undervoltage protection, but this only kicks in at already quite low values. The higher this switch-off threshold is, the longer you will enjoy your batteries, which are usually quite expensive.

  • Selection of the switch-off threshold

Depending on the battery type, different minimum battery voltages must be maintained in order not to damage the battery. For AGM/Gel batteries we recommend setting the BatteryProtect to 11.5 V switch-off threshold. For lithium batteries (LiFePO4) 12.0 V switch-off threshold is recommended. Depending on the intended use of the battery, it may be necessary to change these limits. Manufacturers also give different specifications for their batteries. Therefore always check with the battery manufacturer which switch-off threshold is right for your battery!

  • 1x Victron Energy BPR110048000 Smart BatteryProtect SBP 48/100 100A
  • 1x User manual

Műszaki adatok

Műszaki adatok
Darabszám
1
EAN
8719076041252
Elem feszültsége
48 V
Gyártói cikkszám (MPN)
BPR110048000
Kategória
Tápegység-védelem akkumulátortöltők
Kézikönyv
Igen
Kimeneti áram
100 A
Márka
VICTRON ENERGY
Modell
BPR110048000
Az elmúlt 6 hónap ártörténete
VICTRON ENERGY Smart BatteryProtect 48V-100A akkumulátorvédő (BPR110048000)
Jelenlegi
51 287 Ft
Legalacsonyabb 7 nap
51 287 Ft
Legmagasabb 7 nap
51 463 Ft
24 órás változás
-176 Ft   0%
7 napos változás
—   
30 napos változás
—   

Értékelés írása

Értékelés *
Megjegyzés: A HTML-formázás nem jelenik meg!

További VICTRON ENERGY termékek ebben a kategóriában

8
Eladó: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litvánia · Cégjegyzékszám 303192950 · Közösségi adószám LT100008198612 · Szállítás az EU-ból (Litvánia)
WhatsApp
Messenger
Üdvözlöm, a DistriNode AI-asszisztense vagyok. Szívesen segítek termékek keresésében, a lehetőségek összehasonlításában, PDF-árajánlatok készítésében vagy ügyfélszolgálati bejelentések indításában.
Összes kategória